Commercial Network Infrastructure and Connectivity Deployment

Results at a glance: 100% facility coverage · 25% technician productivity gain · reliable connectivity indoors and out.

Project Overview

For this high-volume car wash, we deployed a comprehensive network solution. We installed two Wi-Fi 6 access points, one inside the office and pay station and one outdoors to cover the wash bays, and wired all devices back to new PoE switches in a clean, reorganized network closet.

A car wash is a harder environment than it looks. There is water everywhere, the chemistry is aggressive, and the equipment that has to stay online — pay stations, point-of-sale, the tunnel controls — does not tolerate a network that drops out.

Key Challenges

• Harsh Environment: Moisture, high humidity, and chemical exposure in the wash bays required IP-rated outdoor access points with protective housings. Consumer hardware would not survive a season out there.

• Coverage Gaps: The original Wi-Fi footprint left dead spots in the tunnel and equipment areas, so we positioned the two new access points carefully for full coverage rather than adding more hardware and hoping.

• Cabling Logistics: Routing CAT6 through tight conduit runs around water lines and metal structures meant precise planning and weatherproof terminations to maintain signal integrity.

Results

• Seamless Connectivity: Technicians and POS terminals now have uninterrupted Wi-Fi across the entire facility, indoors and out.

• Clean, Scalable Infrastructure: The reorganized network closet and PoE switch fabric support future growth, whether that means more access points or more connected devices.

• Reliable Performance: VLAN segmentation keeps payment traffic separated from everything else, which is both a performance decision and a security one.

• Customer Satisfaction: The client praised the minimal disruption during installation and the improvement in connectivity, rating the project 4.9 out of 5.

The Takeaway

Small sites are not simple sites. This is two access points and a switch, and it still required a real design: which hardware survives the environment, where the coverage actually has to reach, and what has to be segmented away from what. A consumer router in the office would have failed within a season, and everyone would have blamed the Wi-Fi rather than the decision.

Built on Ubiquiti UniFi, as enterprise networking work, with the cabling handled as structured cabling.

Running a site where the network has to survive the environment? Tell us what you are working with.